|
Installing Pad Mount
Letters
 |
1.
Clean the installation surface first.
Position the spacing tape on the wall and secure one end
with masking tape. Unroll, level and tape the other end.
Spacing tapes show the general position of each letter
only and are available free upon request. |
|
|
|
|
 |
2. Apply
silicone to all of the pads on the first letter. Position
the letter on the wall where indicated on the spacing
tape. Tape the letter to the wall with several long strips of
masking tape. |
| |
|
|
|
|
3. Continue
with the remainder of the letters, and allow the silicone
to cure for at least 10 minutes before removing the
masking tape.
|
|
|
|
|
